RFT Brakes
Disc Brakes
Caliper Safety Disc Brake Type SCFH
Disc brake type RSTN / Service Brake
Disc brake type RSTN / Service Brake
“Low-speed” brake. Fail-safe principle!
Direct acting at the board disc of a rope drum. Load crash security and protection.
- Direct-acting / Without lever transmission
- Pad forces up to 400 kN per clamp system
- Clamp varations on one brake disc (e.g: 4 x SCFH-4= 1600 kN pad force)
- High and independent direction of rotation braking torque
- Two identical clamp halves
- Lifting gap adjustable from 1 mm to 3 mm
- The hydraulic system is completely encapsulated
Disc brake type RSTN / Service Brake
Disc brake type RSTN / Service Brake
Disc brake type RSTN / Service Brake
- Torque adjustable
- For brake disc ø 250 mm to ø 1250 mm
- Braking torques from 200 Nm up to 23800 Nm per brake
- With “SLM” synchro-lifting-mechanism (guarantees equal air gaps between brake lining and brake disc)
Drum Brakes
Caliper Safety Disc Brake Type SCFH
Disc brake type RSTN / Service Brake
Disc brake type RSTN / Service Brake
“Low-speed” brake. Fail-safe principle!
Direct acting at the board disc of a rope drum. Load crash security and protection.
- Direct-acting / Without lever transmission
- Pad forces up to 400 kN per clamp system
- Clamp varations on one brake disc (e.g: 4 x SCFH-4= 1600 kN pad force)
- High and independent direction of rotation braking torque
- Two identical clamp halves
- Lifting gap adjustable from 1 mm to 3 mm
- The hydraulic system is completely encapsulated
Disc brake type RSTN / Service Brake
Disc brake type RSTN / Service Brake
Disc brake type RSTN / Service Brake
- Torque adjustable
- For brake disc ø 250 mm to ø 1250 mm
- Braking torques from 200 Nm up to 23800 Nm per brake
- With “SLM” synchro-lifting-mechanism (guarantees equal air gaps between brake lining and brake disc)
- MADE IN GERMANY
Drum Brakes for bridges and sluices
Disc brake type RSTN / Service Brake
Drum Brakes for bridges and sluices
The RWS, also known as Rijkswaterstaat-Brake has additional features compared to a standard drum brakes acc. to DIN 15435 to increase safety during the braking process.
- Optimnal suitable for Bridges and sluice gates
- 2 step brake / Time delay braking at 2nd spring
Accessories
Thruster type RBL TH
Brake shoes and brake linings
Thruster type RBL TH
Brake lifter to release and operate industrial brake systems.
- Electro-hydraulical lifting device according to DIN 15430
- Type RBL TH
- Lifting forces from 250 N to 4000 N (others on request)
- Piston strokes of 60 mm up to 120 mm for standard units
- Standard ambient temperature: -25°C up to +50°C
- Standard voltage: 230/400 V (+/- 5%), 50 Hz, 3 phase (Special voltage on request)
Brake Drum with hub
Brake shoes and brake linings
Thruster type RBL TH
Made from solid material (Spheroidal cast iron GGG 40 or steel)
Balance free, quality better 6.3
Free of shrink holes
Standard sizes:
- Ø 160 mm
- Ø 200 mm
- Ø 250 mm
- Ø 315 mm
- Ø 400 mm
- Ø 500 mm
- Ø 630 mm
- Ø 710 mm
- Ø 800 mm
Brake discs
Brake shoes and brake linings
Brake shoes and brake linings
Made from solid material (C45 Standard)
Balance free, quality better 6.3
Standard sizes:
- Ø 250 mm
- Ø 315 mm
- Ø 355 mm
- Ø 400 mm
- Ø 450 mm
- Ø 500 mm
- Ø 560 mm
- Ø 630 mm
- Ø 710 mm
- Ø 800 mm
- Ø 900 mm
- Ø 1000 mm
- Ø 1250 mm
Brake shoes and brake linings
Brake shoes and brake linings
Brake shoes and brake linings
ALU-Brake shoes for drum brake according to DIN 15435
or Sinter brake linings for RFT disc brakes Type RST or RSTN
Drum brake sizes:
- Ø 200
- Ø 250
- Ø 315
- Ø 400
- Ø 500
- Ø 630
- Ø 710